M28W320CB90N1

In Stock

Product Overview

IC Picture

Images are for reference only

Manufacturer Part No M28W320CB90N1
Brand MICRON
Item FLASH-NOR
Part No 28W320

Product Details

Package TSOP-48
Outpack
RoHS Leaded
Voltage 2.7V~3.6V
Temperature 0 C~+70 C
Speed 90 NS
Std. Pack Qty
Std. Carton

SUMMARY DESCRIPTION The M28W320C is a 32 Mbit (2 Mbit x 16) non-volatile Flash memory that can be erased electrically at the block level and programmed in-system on a Word-by-Word basis. These operations can be performed using a single low voltage (2.7 to 3.6V) supply. VDDQ allows to drive the I/O pin down to 1.65V. An optional 12V VPP power supply is provided to speed up customer programming. The device features an asymmetrical blocked architecture. The M28W320C has an array of 71 blocks: 8 Parameter Blocks of 4 KWord and 63 Main Blocks of 32 KWord. M28W320CT has the Parameter Blocks at the top of the memory address space while the M28W320CB locates the Parameter Blocks starting from the bottom. The memory maps are shown in Figure 6, Block Addresses. The M28W320C features an instant, individual block locking scheme that allows any block to be locked or unlocked with no latency, enabling instant code and data protection. All blocks have three levels of protection. They can be locked and locked-down individually preventing any accidental programming or erasure. There is an additional hardware protection against program and erase. When VPP ≤ VPPLK all blocks are protected against program or erase. All blocks are locked at Power Up. Each block can be erased separately. Erase can be suspended in order to perform either read or program in any other block and then resumed. Program can be suspended to read data in any other block and then resumed. Each block can be programmed and erased over 100,000 cycles. The device includes a 128 bit Protection Register and a Security Block to increase the protection of a system design. The Protection Register is divided into two 64 bit segments, the first one contains a unique device number written by ST, while the second one is one-time-programmable by the user. The user programmable segment can be permanently protected. The Security Block, parameter block 0, can be permanently protected by the user. Figure 7, shows the Security Block and Protection Register Memory Map. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller takes care of the timings necessary for program and erase operations. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards.

Stock

Description Qty Unit Price (USD) Datecode Note
M28W320CB90N1 89 0214 In Stock Get Quote
M28W320CB90N1 89 0214 In Stock Get Quote

Available Offers

Description Qty Datecode
M28W320CB90N1 10,000 17+ Get Quote
M28W320CB90N1 1,080 Get Quote
M28W320CB90N1 10,000 200115+ Get Quote
M28W320CB90N1 89 0214 Get Quote
M28W320CB90N1 89 Get Quote
M28W320CB90N1 288 02 Get Quote
M28W320CB90N1 193 01 Get Quote
M28W320CB90N1 288 2002 Get Quote
M28W320CB90N1 193 2001 Get Quote
M28W320CB90N1 6,200 Get Quote

FFFE (Form, Fit & Functional Equivalents)

Description Package Voltage Speed Temperature
M28W320CT-90N1 TSOP-48 2.7V~3.6V 90 NS 0 C~+70 C