| Package |
TSOP2(54)
|
| Outpack |
TAPE ON REEL
|
| RoHS |
RoHS
|
| Voltage |
3.3 V
|
| Temperature |
0 C~+70 C
|
| Speed |
143 MHZ
|
| Std. Pack Qty |
1000
|
| Std. Carton |
|
| Number Of Words |
4M
|
| Bit Organization |
x16
|
| Density |
64M
|
| Max Clock Frequency |
133 MHz
|
| Production Status |
Production
|
| Package Material |
Pb-Free/RoHS-Plating
|
| Product Family |
SDRAM/Mobile LPSDR
|
| Version |
A2
|
| Die Revision |
G
|
General Description
The Micron® 64Mb SDRAM is a high-speed CMOS, dynamic random-access memory
containing 67,108,864 bits. It is internally configured as a quad-bank DRAM with a
synchronous interface (all signals are registered on the positive edge of the clock signal,
CLK). Each of the x4’s 16,777,216-bit banks is organized as 4,096 rows by 1,024 columns
by 4 bits. Each of the x8’s 16,777,216-bit banks is organized as 4,096 rows by 512 columns
by 8 bits. Each of the x16’s 16,777,216-bit banks is organized as 4,096 rows by 256
columns by 16 bits.
Read and write accesses to the SDRAM are burst oriented; accesses start at a selected
location and continue for a programmed number of locations in a programmed
sequence. Accesses begin with the registration of an ACTIVE command, which is then
followed by a READ or WRITE command. The address bits registered coincident with the
ACTIVE command are used to select the bank and row to be accessed (BA0, BA1 select
the bank; A0–A11 select the row). The address bits registered coincident with the READ
or WRITE command are used to select the starting column location for the burst access.
The SDRAM provides for programmable read or write burst lengths of 1, 2, 4, or 8 locations, or the full page, with a burst terminate option. An auto precharge function may be
enabled to provide a self-timed row precharge that is initiated at the end of the burst
sequence.
The 64Mb SDRAM uses an internal pipelined architecture to achieve high-speed operation.
